Sailing The Dream
The Dream - LiFePo4
A total of 600Ah capacity would give us up to 480Ah of usable power (at 80% discharge) of usable capacity with a total weight of 60kg
top of page
Sailing The Dream
- Nov 20, 2022
Galley mini-refit - Gimballed induction cooktop and convection oven
Since the beginning of our boat travels we did not like the idea of LPG on the boat.
Sailing The Dream
- Nov 6, 2022
Coppercoat antifoul treatment - preparation & application (part 2)
This stage of the preparation of the hull was not only backbreaking but also psychologically challenging.
Sailing The Dream
- Oct 23, 2022
Coppercoat antifoul treatment - considerations and costs (part 1)
A pure cost analysis not factoring inflation over a period of 10 years puts normal antifoul paint at 4500€ against the 4200€ of Coppercoat
Sailing The Dream
- Oct 12, 2022
Building a hardtop - costs, other numbers and conclusions (part 6)
To our surprise the weight difference between the old set-up with the original Bimini and the new hardtop was negligible.
Sailing The Dream
- Mar 27, 2022
Building a hardtop - stainless steel works and installation of equipment (part 5)
They were quite surprised that John and I could lift it reasonably easily just the two of us
Sailing The Dream
- Feb 25, 2022
Building a hardtop - joining the pieces and painting (part 4)
With a plan in mind, we prepared a set of lines and straps, arranged in a way that allowed us to flip the 3.8x3.8m hardtop
Sailing The Dream
- Feb 19, 2022
Building a hardtop - fairing (part 3)
Once all the fibreglassing for both pieces was completed it was time to start working on preparing for fairing and primer painting.
Sailing The Dream
- Feb 12, 2022
Building a hardtop - the construction (part 2)
With the decision of building the Bimini on the foredeck, we wasted no time while still waiting for a few work supplies we built a mockup
Sailing The Dream
- Feb 4, 2022
Building a hardtop - the idea, concept and material choices (part 1)
After living on board for four years, we became more and more convinced that a rigid Bimini was one of the items that would improve our life
Sailing The Dream
- Mar 1, 2020
Batteries failure - what went wrong!
Before moving onto The Dream back in 2017 we had spent a lot of time doing research and arriving at our decision with regards to the new...
John
- Dec 16, 2019
2019 Winter projects list
Some projects from last years jobs list weren't completed and there's also the new projects that another year living aboard demand a
Sailing The Dream
- Aug 4, 2019
Increasing the Diesel capacity
After a bit of work fitting the diesel heater in the deep stern locker and then installing the new diesel tank The Dream fuel capacity is no
Sailing The Dream
- Jul 28, 2019
Rigid solar panels - here we go
...when we went to order them the supplier had already run out of stock, damn we missed out the opportunity and the option was to settle wit
Sailing The Dream
- Jul 17, 2019
Warming up for a winter at anchor
We also plan to sail both high and low latitudes in the coming few years. So a diesel heater was a must.
Sailing The Dream
- Jun 30, 2019
EPIRB, PLB, MOB devices - what are they, how do they work and what do we have
Every time we get into the discussion of what are our safety procedures and pieces of equipment with other sailors the discussion is always
John
- May 29, 2019
2018 Winter projects list - what was really done
Ok well goodbye 2018 and hello 2019, we hit a lot of repairs, projects and upgrades last year and the list is comprehensive, I thought we sh
Sailing The Dream
- May 15, 2019
Making the cockpit feel like home - cushions
The original Dufour cushions were just pathetic and embarrassing when one thinks of how "luxurious" they sell the brand. With the
Sailing The Dream
- Mar 14, 2019
How to repair your Solar Panels
A lot has been said about flexible solar panels, one of the things is that they stop producing power quite easily. One of the reasons is the
Sailing The Dream
- Nov 23, 2018
The ongoing bow thruster dramas
The AGM batteries are now right on five years old and we believe at the end of their life, again we don’t know the story of how were they ca
bottom of page